Junior Topcase 55 black Hepco & Becker

Motorcycle model-specific holder to hold Hepco & Becker topcases (topcases with universal plates do not fit). Topcase carrier consisting of a model-specific mounting kit and the Alurack adapter plate to accommodate Hepco & Becker topcases or soft luggage (not suitable for topcases with universal plastic plate) Hepco & Becker aluminum racks are specially designed for the Hepco & Becker topcases. As the successor to the tried and tested tubular luggage rack, the aluminum rack is seen as a consistent further development and is offered for the younger generation of motorcycles. Every Alurack top case carrier is developed specifically for the model and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the aluminum rack has a high level of strength and a very elegant look. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid construction Scope of delivery: model-specific Alurack top case carrier + assembly kit + assembly instructions no additional adapters for topcase mounting are required high quality surface finish Recommended load: 5kg load in the top case (please note the vehicle-specific information, the stored assembly instructions and motorcycle manufacturer information) From a technical point of view, works almost the same as the Easyrack topcase carrier, only that the bracket for the topcase holder is rigidly upwards the model-specific basic rack is the same for the Easyrack and Alurack A special bracket is required to accommodate the aluminum standard top case 35 (item number: HB700007350 or HB700007351) Porters do not require an ABE or registration

Proven tubular luggage racks for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all Hepco&Becker top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed.The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require ABE or registration Please note: Not suitable for Hepco&Becker Orbit top case and top cases with universal plate

  Proven Tubular luggage racks Topcase carrier for Hepco & Becker Topcases of the highest quality. Hepco & Becker luggage racks are specially designed for almost all Hepco & Becker top cases.But not only new top cases fit. Older Hepco & Becker models can also be fitted. The basic mount has not changed.The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions.Thanks to the construction from German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety.If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco & Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended payload: approx. 5 kg (Please note the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require ABE or registration Color: black Weight: 3.1 kg Please note: Not suitable for Orbit" top case and top cases with universal plate

Incl. Drilling template. Solid back pad for the pillion rider. The top case remains waterproof. Specific back cushion for your Hepco & Becker topcase. The ideal addition when driving for two. The back cushion should be a constant companion on every journey with a passenger. The cushion is simply attached to the topaz. To do this, holes must be drilled in the top case. But don't worry, assembly is easy: a drilling template is included. The top case is 100% waterproof again after the back cushion has been installed. The back padding for each topcase is made of black PU material to fit and shape.

So that there is "order" in the case. Easy to pack and remove the contents of the case. Only water-repellent because the case is waterproof. With this inner pocket, things are no longer lying around loosely in the suitcase. The case is easier to load because the inner bag can be packed beforehand. And at the end of the tour, you don't have to remove the entire suitcase and carry it away, just the inside pocket. The bag is made of durable, black fabric. Equipped with a 2-way zipper and an adjustable shoulder strap, with this bag you will always be clean when unpacking. Suitable for: Junior Topcase 55 Journey TC 42/50/52 Journey side case 42 Orbit Topcase

  Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructions No   additional adapters are required for top case mounting High-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored assembly instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 3.6 kg Color: black Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators

Proven tubular luggage racks for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all Hepco&Becker top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed.The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5 kg (Please note the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Can usually be combined with side case carriers or C-Bow holders without any problems (observe mounting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration Color: chrome Weight: 2.9 kg Please note: Not suitable for Hepco&Becker Orbit top case and top cases with universal plate

High-quality metal attachment for top cases to attach additional light luggage. Including drilling instructions. You can use this railing to transport other things (e.g. sleeping bag, air mattress) that you need on your journey. The railing is simply screwed onto the topaz. To do this, holes must be drilled in the topcase lid. But don't worry, the top case is 100% waterproof again after the railing has been installed. For each topaz, the railing is made of tubular steel and is precisely shaped and protected with a black plastic coating.