Filter by motorcycle model:
Auxiliary headlight for Moto Guzzi V85 TT Hepco & Becker
E-mark (no registration necessary)Improved lighting conditions in road trafficRobust aluminum housing, blackComplete headlight set with two headlights, switch, wiring harness, mounting material and housing protectionLamps can be switched on manuallypowder-coated surface finish12V - 8.6W, 770lmMounted using the enclosed model-specific bracket especially for this motorcycle model. See instructionsRegulations according to §50 StVZOAdditional lights may be mounted at a maximum distance of 250mm from the center of the vehicle and at a maximum height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination.Our headlights can be operated as fog lights or as additional high beams.Please note here:While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlamp. Operation as a fog light can be switched with the marker light or dipped beam.For these reasons, Hepco & Becker offers sets with 2 headlights as fog lights, which are operated with their own switch.The headlights must have the E-mark in order to be operated.Our LED Flooters have a corresponding test mark and are therefore registration-free.Detailed installation instructions with wiring diagram are included with the flooters. Everything is pre-assembled, without soldering work. It is not necessary to cut any cables.The on/off switch is attached to the fittings/handlebars.The headlights must be adjusted during a test ride in the dark so that other road users are not dazzled.We recommend visiting a specialist workshop for installation.
Engine guard black for V 7 II (Bj.15-) Hepco & Becker
Damaged: The item has minimal installation marks on the mounting material. The visible parts of the brackets are undamaged. We are therefore offering it at a reduced price. Perfect protection for your bike. Sturdy tubular steel with high-quality coating. Regardless of whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The protective bars from Hepco&Becker perfectly trace the lines of the Mascine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad. Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or notes that may arise no ABE or registration is required Moto Guzzi V7 II Special Moto Guzzi V7 II Special Moto Guzzi V7 II Stone Moto Guzzi V7 II Classic Moto Guzzi V7 II Stone
Grip guard for Moto Guzzi Stelvio (24-) Hepco & Becker
The Hepco & Becker grip guard provides reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. powder-coated solid construction made of tubular steel Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please follow the installation instructions and the vehicle-specific instructions If a handlebar riser is installed, mounting is also possible in most cases. To do this, longer bolts are required for installation, depending on the handlebar riser. You will need to obtain these screws yourself, as we do not have all screws available in all suitable lengths.
Main stand for Moto Guzzi V9 Bobber/Special Edition (21-) Hepco & Becker
A black center stand for the Moto Guzzi V9 Bobber/Special Edition (2021-) - stability, sturdiness and easy handling. The main stand from Hepco & Becker usually does not restrict lean angle clearance when riding and is extremely robust. Thanks to the sophisticated geometry and non-slip tread surface, it is very easy to park the motorcycle safely in any situation. Our precisely manufactured stand is very stable, sandblasted, primed and powder-coated in black, making it weatherproof and stable in value. Main stands simplify maintenance work and ensure a secure stand, e.g. when refueling. They relieve the load on the suspension elements and the rear wheel during winter storage. The ABE is supplied and there is generally no restriction on lean angle clearance. The high-quality surface finish gives your Moto Guzzi V9 Bobber/Special Edition a stylish look. The scope of delivery includes the main stand, mounting material and instructions. Please follow the installation instructions supplied for trouble-free installation. To simplify the mounting of the tension spring, we recommend our helpful tool with item number 700030.
Original footrest, aluminum, pillion for Moto Guzzi V7 I+II
Original spare part - Piaggio Genuine Spare Parts Aluminum 2S000169
Rear tank belt for Moto-Guzzi V7 750 Racer (11-14)
Original spare part - Piaggio Genuine Spare PartsRear tank belt 886617
Side case carrier fixed bolted chrome for V 7 III Carbon, Milano, Rough from 2018-
NOTE: The product image shows the black version. The offer is for the chrome version! Would you like to add a touch of elegance and functionality to your Moto Guzzi V7 III (Carbon, Milano, Rough) from 2018 to 2020? Our bolt-on chrome side case carriers from Hepco&Becker are the perfect addition to give your motorcycle extra charm and practical versatility. The shiny chrome gives your bike a sophisticated look and emphasizes its timeless style. These carriers are not only visually appealing, but also extremely functional and perfectly tailored to your model. The installation of almost all Hepco&Becker hard-shell side cases is uncomplicated. They offer a solid metal lock to securely and reliably fasten your cases. A lock adapter (normally included with the cases) is attached to the rear right and left of the carrier to securely anchor the case retaining lock. In addition to practical luggage transportation, these carriers serve to emphasize the characteristic style of your V7 III. The shiny chrome harmonizes perfectly with the classic design and gives your motorcycle an upscale touch. Installation is straightforward thanks to the material supplied and detailed instructions. Most indicators can remain in their original position, but a small adjustment may be necessary to ensure the optimum light angle. The combination with our rear carriers offers numerous possibilities for customization and extension. The enclosed instructions and model-specific notes ensure safe and easy installation. No ABE or registration is required for most luggage systems, so you can concentrate fully on your rides. With a tube diameter of 16 mm, these carriers offer stability and durability - ready to accompany you on countless adventures.
Side stand plate for V85 TT (year 2019) Original Hepco&Becker
Enlarges the footprint of the side stand and therefore offers optimum stability even on soft ground. Sturdy construction made of aluminum and steel Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink on the side stand.A precisely milled widening plate that can be quickly bolted to the side stand and eliminates this danger is now available from us!The HEPCO&BECKER side stand support extension! more than twice as much contact surface in some cases secure stand of the machine on all surfaces Oxidation-proof anodized aluminium and black-coated upper steel counter-holder simple installation with just a few screws does not require ABE or registration only suitable for model year 2019
SW-Motech handlebar riser, black for Ø 28 mm handlebars, H=20 mm
Made from high-quality aluminum alloy, the handlebar riser raises the handlebars by 20 mm and provides noticeably more riding comfort. The stable and weather-resistant handlebar riser fits handlebars with a diameter of 28 mm. Raising the handlebars by 20 mm A model-specific general operating permit (ABE) for use in German road traffic is available for many motorcycle models For a more relaxed riding position Replaces the original handlebar clamp For Ø 28 mm handlebars with a hole spacing of 37-46 mm Suitable for the following vehicles Moto-Guzzi V100 Mandello (22-), MG. Moto-Guzzi V100 Mandello S (22-), MG Details Material: aluminum Surface: powder-coated Color: black Total weight: approx. 0.3 kg Scope of delivery 2 x handlebar risers for Ø 28 mm handlebars 2 x handlebar clamps Mounting instructions Mounting material Note If you cannot reach the handlebars comfortably, you have the choice between universal handlebar risers in various designs, model-specific variants or handlebar relocations which, in addition to raising the handlebars, also offer a rearward offset The length of the Bowden cables and brake lines must be checked individually
Tank ring Basic for Moto Guzzi Stelvio (24-) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco & Becker.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the store to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds mechanical locking mechanism Simple operation the Hepco & Becker tank bag is simply put on and locks audibly on the tank ring thanks to an ingenious mechanism Unlocking: The mechanism is unlocked by a lashing strap at the front of the tank bag in the direction of travel; the tank bag is simply removed Simple but effective mechanism Recommended maximum speed with tank bag fitted: 130 km/h (Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product) Recommended load in the tank bag: approx. 3kg Tank bag systems do not require an ABE or registration in the papers in Germany. Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Note: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
Tubular luggage rack black for Moto Guzzi V7 850 Sport (25-) Hepco & Becker
The tubular luggage racks from Hepco & Becker are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction made of German quality steel, the Hepco & Becker Luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is not enough space, the bridge can be secured with the Hepco & Becker Universal luggage rack extension (available separately) . Features: Recommended payload: approx. 5kg (Please note the model-specific information on the respective carrier, as well as the motorcycle manufacturer-specific information) Can usually be combined with side case carriers or C-Bow holders without any problems (observe mounting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require ABE or registration Color: black Weight: 2.3 kg Please note: Not suitable for topcases, only suitable for soft luggage!