RS 660 2020-2024 (KSA, KSP)
Available categories
Matching articles
Adapter for original Aprilia turn signal left
Adapter for original turn signal left for div. Aprilia models. Powder coated or KTL painted black.
Adapter for original Aprilia turn signal right
Adapter for original turn signal right for div. Aprilia models. Powder coated or KTL painted black.
Adjustable footrest system for Aprilia RS 660 /Factory / Tuono 660/Factory
Adjustable rider footrests made from CNC-milled aluminum. The footrests are multi-adjustable for an optimum riding position. Suitable for inverted shifting scheme. Note: For race track use only.
Air filter element for Aprilia RS 660 (20-) Original
Air filter element for Aprilia RS 660 - Original Aprilia
Akrapovic sport exhaust silencer complete system for Aprilia RS 660 (homologated / approved)
The homologated Aprilia silencer complete system "Made by Akrapovič" for an even sportier look with a Loudness of 93 dB at 5250 rpm. Thanks to the use of excellent materials and the design of the system, the RS 660 sounds even richer and sportier. The exhaust system is ECE EU5 homologated The use of this Aprilia original accessory does not affect the vehicle warranty. Silencer Absorption muffler with stainless steel mesh and heat resistant insulating material Carbon fiber muffler shroud and bracket Stainless steel inlet cap and welded inlet bushing Pre-silencer: Absorption muffler with stainless steel mesh and heat-resistant Insulation material 2-in-1 collector made of stainless steel with conical tubes Titanium shroud and bracket Catalytic converter mounted between pre-silencer and manifold pipes; EU5 compliant Manifold system: Aluminum cylinder head flange with stainless steel liners Conical stainless steel manifold pipes Connection for stainless steel lambda probes
Anti-theft alarm system Euro 4 / 5 / 5+ Original Piaggio
Features: Electronic anti-theft device with its own power supply and improved sensitivity. Multifunctional remote control. Reduced energy consumption. CE homologation. Mounting kit required depending on vehicle, must be ordered separately. The following mounting kits are required in each case and must be ordered separately: 2S001581 Aprilia RS660 / Tuono 660 1D004150 Aprilia SR Compact GT 125 / 200 E5 2S001869 Aprilia Tuareg 660 E5 ABS 2S002266 Aprilia Tuareg Euro 5+ 2S002001 Moto Guzzi Stelvio 2S001571 Moto Guzzi V7 850 Stone / Special / Sport E5 from 2021 2S001437 Moto Guzzi V85TT E4 / E5 from 2019 2S000758 Moto Guzzi V9 1D003037 Piaggio Beverly 1D001284 Piaggio Liberty 1D001456 Piaggio Medley 1D001738 Piaggio MP3 1D003740 Piaggio MP3 1D002874 Piaggio MP3 300 HPE (additionally for MMP) 1D001795 Vespa GTS E4> 1D004367 Vespa GTS/GTV 2023> (keyless) 1D003040 Vespa Primavera / Sprint E4 from 2018
Aprilia cover for brake fluid reservoir - black for RS 660 / Caponord 1200 / Tuono 660
Cover for brake fluid reservoir made of billet aluminum. Black anodized.Suitable for Aprilia RS 660 / Caponord 1200 / Tuono 660
ARROW exhaust INDY RACE Carbon for Aprilia RS660 (21-)
ARROW INDY RACE rear silencer with carbon shell and carbon end cap, with dB-Killer insert, according to manufacturer's specification with road approval.For Aprilia RS660, type KS, model year 2021-Only for use with Arrow manifold AR-71755 Made in Italy: passion for good sound and a wide variety of models - Arrow exhaust systems convince with individual product lines on two-wheelers of all classes.The Indy Race exhaust - a successful symbiosis of design and good sound. The shape is based on the oval of the famous American race tracks. Like other products of Arrow, the Indy Race series is also processed with the highest craftsmanship in the TIG and TIG welding process. The shell of the muffler underlines the sporty claim.
ARROW manifold with catalyst for Aprilia RS660 (21-)
ARROW manifold (with catalyst), made of stainless steel, with road approval. For ApriliaRS660, Type KS, Model year 2021-Only for use with Arrow rear silencer AR-71929 Passion for good sound and a wide variety of models - that's what Arrow stands for. With a lot of know-how through years of data collection and cooperation with racers from MotoGP, WSBK and other classes, the Arrow exhaust systems are constantly developed and optimized with the progress of technologies and leaned on current trends.Collectors and pipes are the key to optimal exhaust routing and planned power delivery. CNC milled components and welds that do not reduce the inner diameter contribute significantly. Thus, the diameter of the pipes, bending radii, welds and their exact placement and execution, as well as the guidance of the manifold pipes, are optimally adapted to each bike. Depending on the engine and ignition sequence, the optimal layout of the manifold, the connecting pieces and the intermediate pipes up to the rear mufflers is worked out in countless test bench runs.The Arrow manifolds are made of a special steel alloy. The V2A steel is highly temperature-resistant and can be mechanically deformed very well. It has a high resistance to humidity, water and weak alkalis as used in motorcycle care products.Features:- Made of stainless steel- Flow optimized- Optimum power delivery in conjunction with different rear silencer variants- Available for numerous models
Basic tank ring incl. tank bag closure unit for Aprilia Tuono 660 (20-21) / RS 660 (20-24)
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3.0 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications, as well as the model-specific information on the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system Not suitable for: Street Enduro M, Royster Tankbag, Epic 11, Epic 13, Epic 16
BMC Sport air filter for Aprilia RS 660 / Tuono 660 (20-) FM01117, red
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. The extensive know-how from racing is used in the manufacture of the performance-optimized filters and each one meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil, and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures Ecological and economical Winner in all categories BMC operates in numerous sectors: Automotive, Racing, Aviation, Marine and Industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Check out our YouVideo for more information:
Brake lever black, Racing for Aprilia RS/Tunono 660 (20-) RSV4
Brake lever black, Racing for Aprilia RS/Tunono 660 (20-) RSV4
Brake lever, aluminum, right for Aprilia RSV4 / RS 660
The brake lever made of billet aluminum is over 30% lighter than the standard component. 10-way adjustable, it guarantees optimal ergonomics. For Race use only
C-Bow side carrier black for Aprilia Tuono 660 (20-21) / RS 660 (20-24) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific instructions and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2,2kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags Not compatible with C-Bow horizontal or vertical installation Not socius-compatible with bags fitted
C-Bow side carrier black for Aprilia Tuono V4 (21-24) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific instructions and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.9kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags
Carbon front spoiler for Aprilia RS 660 (20-23)
The carbon front spoiler gives the RS660 an additional sporty look. The two fairings can be easily replaced with the originals. The front spoiler is designed so that it can be fitted to the motorcycle either with the original exhaust or with the homologated SC-Project exhaust system.
Carbon license plate holder original for Aprilia RS 660 / Tuono 660
The license plate holder is lighter than the standard part and impresses with a noble, valuable appearance
Clutch lever black, Racing for Aprilia RS/Tuono 660 (20-) RSV4
Clutch lever black, Racing for Aprilia RS/Tuono 660 (20-) RSV4
Clutch lever, aluminum, right for Aprilia RS 660
Made of billet aluminum, the ergonomically optimized clutch lever is over 30% lighter than the standard component. For Race use only
Comfort gel seat rider for Aprilia RS 660 /Factory / Tuono 660
Comfort seat with gel inserts. Cover in stylish, sporty carbon look. For riders who want even more riding comfort and absolute grip in the saddle of their RS 660 / Tuono 660.
Complete system for Aprilia RS 660 (2023)
Note: This article is only approved for 100 HP (73 KW). Not suitable for 48/95 HP (35/70 kW). In order to use this exhaust system , the control unit must be programmed with a special mapping. This was specially developed by Aprilia technicians in order to guarantee performance, sound and compliance with the Euro 5 emissions standard . The mapping (software) can only be installed by an Aprilia dealer . Suitable for: Aprilia RS 660 4T 8V LC ZD4KVH00 Euro 5 (2023) Aprilia RS 660 4T 8V LC ZD4KSG00 Euro 5 (2023) Aprilia RS 660 Extrema 4T 8V LC ZD4KSR00 Euro 5 (2023)
Crash pads for Aprilia RS 660 / Tuono 660 - Barracuda
The Barracuda crash pads are specially manufactured for the respective motorcycle models and can be mounted on the motorcycle without additional modification. The scope of delivery includes the right and left crash pad and a vehicle-specific screw set. The plastic pad with anodized aluminum spacers is resistant and durable. Colored inserts are available for visual enhancement (Art.nr. BC-TA-INSERT: silver, black, gold, green, blue and red - please order separately, see "Additional items" tab), with which you can individualize your crash pads and color-match them to your motorcycle.
Decor set Wheel stickers rim bed for Aprilia RS 660 / Tuono 660
Precisely fitting decorative strips for gluing into the rim well for an even sportier look. - UV-resistant decor kit to stick on.
Drybag 180 rear bag for Aprilia RS 660, black / gray - SW Motech
The Drybag 180 is a functional rear bag that you can easily lash to the pillion seat or a luggage rack - whether lengthwise or crosswise. The bag has a welded bottom and an integrated carrying handle on the side. The Drybag 180 can be perfectly combined with the Drybag 350 - a popular luggage duo on many motorcycle trips around the globe. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be easily rolled and transported compressed on the motorcycle regardless of the payload. The Drybags are completely waterproof and have a high UV resistance. The new arrangement of the straps allows easy combination with other Drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new Drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Universal fit for almost all motorcycles Made of robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible due to elastic texture D-rings allow the bag to be pulled tightly against the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for increased safety on the road Fits Aprilia RS 660 (20-), KS Aprilia RS 660 (20-), KV Scope of delivery 1 x Drybag 180 tail bag 4 x loop straps 1 x paint protection film Fitting instructions Details Material: 500D Polyester Surface: PVC coated Color: black / gray Dimensions: 39,0 x 25,0 x 18,0 cm Total weight: approx. 0,9 kg Total volume: 18,0 l Notes Shoulder strap sold separately. Exterior pockets are splash proof and not completely waterproof.