F 850 GS 2018-2023 (K81, 4G85, 0B09)
Available categories
Matching articles
Additional luggage rack left for BMW F 850 GS, R 1200 GS LC /Rally, R 1250 GS, aluminum, black
This carrier offers unique features compared to the competition. First of all, it is extremely light as it is made of magnesium and aluminum alloy. It has cut-resistant tabs at the attachment points and the front part is the same color as the bag's red release button. The middle part of the carrier has a sliding rail to facilitate opening and closing and to prevent scratches on the plastic of the case. There are 4 rubber shock absorbers on the underside to cushion excessive loads on unpaved roads. This innovative patented system is designed to reduce stress on the bag mount. The surface is finished with a durable powder coating and additional non-slip caps are fitted to protect the bottom of the bag. Details: Only compatible with VARIO cases Does not interfere with the opening of the cases Easy to install - no need to drill holes Material: aluminum Coating: black with textured look Total weight of the product including mounting bracket: 1.3 kg Notes: The permissible safety load should not exceed the weight specified in the bags (weight in the bag + weight loaded on the carrier) It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.: AC1186) Luggage net available separately (Isotta art. no.: AC06)
Additional luggage rack right for BMW F 850 GS, R 1200 GS LC /Rally, R 1250 GS, aluminum, black
This carrier offers unique features compared to the competition. First of all, it is extremely light, as it is made of magnesium and aluminum alloy. It has cut-resistant tabs at the attachment points and the front part is in the same color as the red release button of the bag. The central part of the carrier has a sliding rail to make it easier to open and close and to prevent scratches to the plastic of the case. 4 rubber shock absorbers are fitted to the underside to cushion excessive loads on unpaved roads. This innovative patented system is designed to reduce stress on the bag mount. The surface is finished with a durable powder coating and additional non-slip caps are fitted to protect the bottom of the bag. Details: Only compatible with VARIO cases Does not interfere with the opening of the cases Easy to install - no need to drill holes Material: aluminum Coating: black with textured look Total weight of the product including mounting bracket: 1.3 kg Notes: The permissible safety load should not exceed the weight specified in the bags (weight in the bag + weight loaded on the carrier). It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.: AC1186) Luggage net available separately (Isotta Art.No.: AC06)
Aluminum crash bar black for BMW F 800 GS (24-)
Protect your BMW F 800 GS 2024 with our robust aluminum crash bar, designed to provide excellent protection in the event of falls or impacts. With a diameter of 25 mm, this crash bar combines strength and lightness and weighs only 3.7 kg. Its aluminum construction not only guarantees durable protection, but also helps to keep the weight of your vehicle to a minimum, improving handling and performance. Specially developed to fit the design of the BMW F 800 GS, our crash bar offers quick and easy installation without compromising the aesthetics of the motorcycle. Add a touch of safety and style to your adventure with this essential accessory! Technical features: Specific weight: 3.7 kgDiameter: 25 mmColor: N - BlackIsotta quality100% Made in Italy
Alurack top case carrier black for BMW F 850 GS Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 2.4 kg Color: black Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Alurack top case carrier for combination with original accessory luggage rack black for BMW F 850 GS
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 1.6 kg Color: black Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Only for mounting on original accessory bridge (touring package). Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
ARROW exhaust MAXI RACE TECH for BMW F 850 GS (18-)
ARROW MAXI RACE TECH rear silencer with aluminum shell and carbon end cap, with welded intermediate pipe, road legal. For BMWF850GS, type 4G85, model year 2018-For use with original or ARROW Racing manifold AR-71743MI or ARROW Racing intermediate pipe AR-71742MI Specifically for motorcycles with large displacements per cylinder, Arrow developed the Maxi Race-Tech.Very similar in structure to the Race-Tech, here the internal volume and the routing of the exhaust flow have been optimized once again to meet the requirements of the large individual displacements. The Maxi Race-Tech series is equipped in the homologated version with dB-Killer (Note: Road approval only with installed dB-Killer!).
ARROW MAXI RACE TECH exhaust for BMW F850GS 2018-, aluminum, black
ARROW DARK MAXI RACE TECH rear silencer with black anodized aluminium cover with carbon end cap, with welded-on intermediate pipe, with road approval. For BMWF850GS, type 4G85, model year 2018-For use with original or ARROW Racing manifold AR-71743MI or ARROW Racing intermediate pipe AR-71742MI Arrow developed the Maxi Race-Tech especially for motorcycles with large displacements per cylinder.Very similar in structure to the Race-Tech, the internal volume and the routing of the exhaust flow have been further optimized to meet the requirements of the large individual displacements. The homologated version of the Maxi Race-Tech series is equipped with a dB-killer (note: road approval only with installed dB-killer!).
ARROW Racing-Krümmer aus Edelstahl für BMW F 750 GS / F 850 GS 2021-
ARROW Racing-Krümmer aus Edelstahl für BMW F 750 GS / F 850 GS 2021- ARROW Racing-Krümmer (ohne Katalysator), aus Edelstahl. Für BMW F 750 GS, Typ MG85, ab Modelljahr 2021- F 850 GS, Typ MG84, ab Modelljahr 2021- Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW Krümmer BMW F850 GS
Barkbusters hardware kit two-point attachment
Description AUSTRALIAN MADE - "Aussie Made Aussie Tough" Specially designed for the BMW F750GS (from '18), BMW F850GS (from '18) and BMW F850GSA (from '18), BMW R1250GS (from '18) and BMW R1250GSA (from '19) with OEM specifications (Original Equipment Manufacturer). Two mounting points secure the fully wraparound aluminum design. Heat-treated aluminum backbone for added strength and impact protection. (powder coated: BLACK) Easy installation. Hardware kit only (NO plastic guards). Compatible with JET, VPS, STORM or CARBON guards(sold separately).
Barkbusters hardware kit two-point mounting aluminum BMW
Hardware kits are tailor-made and fit perfectly on many Street, Adventure, Dual Sport, Trail and Rally bikes. The full wrap-around aluminum hardware is compatible with JET, VPS, STORM or CARBON fenders. All recommended mounting options are for motorcycles with OEM specifications. Two Point Mount products are designed for impact protection.
BMC sport air filter for BMW F 750/850 GS (19-) and F900 R/XR (20-), red
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
BMC Sportluftfilter für BMW F750GS 2018-2019, F850GS 2018-2019, F850GS Adventure 2019-, F900R/XR 202
BMC Sportluftfilter für BMW F750GS 2018-2019, F850GS 2018-2019, F850GS Adventure 2019-, F900R/XR 2020- BMC Sportluftfilter für BMW F750GS (ab Modelljahr 2018-) F850GS (ab Modelljahr 2018-) F850GS Adventure (ab Modelljahr 2019-) F900R (ab Modelljahr 2020- ) F900XR (ab Modelljahr 2020- ) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für BMW F750GS/F850GS/F900R,XR
Bracket for mounting on the windshield for Navi for BMW F 850 GS (BJ. 18-) / F 750 GS (BJ. 18-) Origina
for BMW F 850 GS (18) / F 750 GS (18)Bracket for mounting on the windshield for S902A, S920M, S920L and navigation / Smartphone holder / For S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B (not included)Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems etc. cannot be guaranteed
C-Bow side carrier black for BMW F 850 GS Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.2 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Xtravel C-Bow / Legacy courier bag L only in combination with extension set 20mm art. no. 7106320001 Developed for the standard condition of the bike. Not tested with accessories such as: exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Case carrier set Cutout stainless steel carrier incl. case set Xplorer Cutout black for BMW F 850 GS
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.9 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: black, stainless steel
Case carrier set Cutout stainless steel carrier incl. case set Xplorer Cutout silver for BMW F 850 GS
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.9 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: silver, stainless steel
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg