R 12 G/S 2025- (KR2, 0N21)
Available categories
Matching articles
Adapter cable accessory blinker for BMW
Adapter cable for accessory indicators to the original vehicle wiring harness. For various BMW vehicles. Supplied in pairs (2 pieces).
Additional plate extension engine guard blackfor BMW R 12 G/S (25-) Hepco & Becker
Details: Black additional plate Perfect addition for extra protection and style Elegant, black finish Provides additional shielding and protection for the engine Tailor-made for your motorcycle Prevents damage from stone chips, dirt and adversity Easy installation with included mounting hardware Follow the installation instructions for smooth installation Scope of delivery: Black additional plate and necessary mounting material Weight: 0.4 kg
Alurack top case carrier black for BMW R 1250 RS (19-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco&Becker aluminum racks are specially designed for Hepco&Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 3.0 kg Color: black Scope of delivery Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
C-Bow side carrier black for BMW R 12 G/S (25-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be simply and easily attached to the C-Bow with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.1 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Xtravel C-Bow / Legacy courier bag L only in combination with extension set 20mm (item no. 7106320001). Developed for the standard condition of the bike. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Case carrier set Cutout carrier incl. case set Xplorer Cutout black for BMW R 12 G/S (25-)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: Recessed 37 liter case on the end pot side 40 liter case on the other side Highly impact-resistant plastic and anodized aluminium sheets in combination Incl. key and cylinder Absolutely watertight thanks to integrated rubber seal in the lid Extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: Adventure-suitable, weather-resistant and bolted stainless steel pannier rack Powder-coated Incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.4 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: black Notes: Restrictions in combination with top case. Please follow the assembly instructions. Combination of Xplorer side cases with Xplorer TC60 is not possible. Also suitable with original pillion grab handle.
Case carrier set Cutout carrier incl. case set Xplorer Cutout silver for BMW R 12 G/S (25-)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: Recessed 37 liter case on the end pot side 40 liter case on the other side Highly impact-resistant plastic and anodized aluminium sheets in combination Incl. key and cylinder Absolutely watertight thanks to integrated rubber seal in the lid Extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: Adventure-suitable, weather-resistant and bolted stainless steel pannier rack Powder-coated Incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.4 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: blacksilver Notes: Restrictions in combination with top case. Please follow the fitting instructions. Combination of Xplorer side cases with Xplorer TC60 is not possible. Also suitable with original pillion handle.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash pad set for Adventure shells for BMW R 12 G/S (25-)
The solid crash pads made of PP plastic offer the Adventure hand protectors additional protection in the event of falls and crashes and, in conjunction with the aluminum bars and the Adventure hand protector shells, provide even more robust and reinforced protection. The crash pads are placed exactly at the point where the motorcycle first comes into contact with the ground in the event of a fall. The robust and abrasion-resistant material protects both the handguards and the aluminum bar in the event of an emergency. The crash pads, which are matched to the design of the Adventure handguard shells, also underline the Adventure look. If necessary, damaged crash pads can be easily replaced. Crash pads for existing Adventure hand protector shells Provides additional protection in the event of falls and crashes Simple installation thanks to custom-fit design Scope of delivery 1 x crash pad set for Adventure shells Fitting instructions Mounting material Details Material: plastic Color: black Total weight: approx. 0.1 kg Please note Not compatible with KOBRA, BBSTORM or Sport hand protector shells.
Easyrack top case carrier black for BMW R 12 G/S (25-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended top speed: 130 km/h Weight: 3.3 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Engine guard black for BMW R 12 G/S (25-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.5 kg Color: black Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Widening set 42276546001 is required when combining the engine guard with the original cylinder head cover guard. Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products are only developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine protection plate black for BMW R 12 G/S (25-) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Hepco & Becker engine protection plates protect the manifold and the engine block perfectly against impacts and stone chipping, even with the heaviest ground contact. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminum, the Hepco & Becker engine protection plate allows enough air through for cooling thanks to its special shape and is naturally angled in such a way that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. Details: Effective protection for stone chips and crossings Provides additional protection for sensitive parts on the manifold and engine block Technically high-quality workmanship Made from high-strength aluminum MADE IN GERMANY Approx. 4mm thick Precisely manufactured, adapted to the shape of the motorcycle Incl. mounting kit and easy-to-understand instructions Please observe the fitting instructions and model-specific information as to whether there may be any restrictions Surface finish: Brushed, anodized Color: Black anodized Weight: 2.3 kg Notes: An underride guard is registration-free - so you do not need to enter it in the papers and therefore do not need an ABE. Please observe the fitting instructions and model-specific information as to whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorcycle! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.
Extension set for Adventure hand protectors for BMW R 12 G/S (25-)
This impact-resistant plastic extension can be used to increase the protective surface of the Adventure hand protectors. The extension is attached to the top edge of the hand protector shells with two screws. It blends in seamlessly and offers your hands more protection from wind and weather. Extension for existing Adventure hand protector shells Provides additional protection from wind and weather Scope of delivery 1 x extension set for Adventure hand protectors Fitting instructions Mounting material Details Material: plastic Color: black Total weight: approx. 0.1 kg Please note Not compatible with KOBRA, BBSTORM or Sport hand protector shells.
Extension set for sport hand protectors for BMW R 12 G/S (25-)
This impact-resistant plastic extension can be used to increase the protective surface of the Sport hand protectors. The extension is attached to the top edge of the hand protector shells with two screws. It blends in seamlessly and offers your hands more protection from wind and weather. Extension for existing Sport hand protector shells Slim design with a sporty look Impact-resistant plastic protects against wind and weather Easy to fit to the Sport hand protector shells thanks to the custom-fit design Scope of delivery 1 x extension set for Sport hand protectors Fitting instructions Mounting material Details Material: plastic Color: black Total weight: approx. 0.1 kg Please note Not compatible with KOBRA, BBSTORM or Adventure hand protector shells.
Gimbal protection black for BMW R 12 G/S (25-) Hepco & Becker
Details: Made in Germany Extremely stable construction Mounting on existing screw points Incl. mounting material and instructions Color: black Weight: 0.8 kg
Handle guard set black for BMW R 12 G/S (25-) Hepco & Becker
The Hepco & Becker model-specific hand protector guard ensures reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. Tubular steel construction precisely tailored to your motorcycle for the perfect look. Ideal for all adventure bikes to stabilize the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for handlebar fittings in the event of a fall with optimum aerodynamics. As individual as you are - make it your bike! Details: Material: Tubular steel, made in Germany Surface finish: High-quality, color-matching powder coating Weight: 1.5 kg Color: black Scope of delivery: Right + left incl. mounting material and Assembly instructions Notes: Only in conjunction with original BMW plastic hand guard. Can also be fitted with original BMW navigation system preparation. The plastic hand protectors shown in the pictures belong to the delivery condition of the motorcycle, they are NOT included! Please observe the model-specific information listed in the fitting instructions and the features! Hepco & Becker model-specific products are, unless explicitly stated otherwise only developed for the standard condition of the motorcycle! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.
Lamp guard black for BMW R 12 G/S (25-) Hepco & Becker
A stone thrown up on off-road passages often means the end for the expensive headlight. The Hepco & Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look. Details: Matched to the design of the motorcycle Effective protection No reflections or danger from glare Simple mounting on mostly existing screw points Solid construction made from German steel Robust and high-quality coating Made in Germany without TÜV Color: black Weight: 0.3 kg Note: There is no ABE or TÜV approval for this product in Germany.
License plate holder for BMW R 12 G/S
alpha Technik license plate holder for BMW R 12 G/S, type GN12 EURO5+, model year 2025-. With reflector and license plate light. For use with accessory indicators (M8 and M10 thread). When using the original indicators, please order the corresponding blinker holders separately, see additional article. Features: - Stainless steel and aluminum - high-precision laser cut, rust-free & resistant.- Lightweight & yet stable.- Elegantly finished with black cathodic dip coating or black anodized coating.- Infinitely adjustable inclination.- All necessary fastening materials for vehicle mounting available, incl. holder for accessory indicators with M8 and M10 thread.- License plate light and reflector with E-mark.- The width of the blinker spacing can be adjusted, making it compliant with directives.- Made in Germany - all parts made in Germany.The short license plate holder from alpha Technik impresses with its sporty design, functionality and simple installation (detailed installation instructions included).With a width of approx. 180 mm, the back plate is ideal for the new, narrow license plates.Please note: - If you intend to fit the original indicators, please order the corresponding adapters separately.- We also offer suitable adapter cables for accessory indicators and a suitable indicator relay. These and other accessories for the license plate holder can be found under the Accessories tab.
Lowering kit 25 mm for BMW R 12 G/S
alpha Technik lowering kit for BMW R 12 G/S, vehicle type: GN12 EURO5+, EC type approval no.: e1*168/2013*00341*, from model year 2025-. Seat height reduction by approx. 25 mm. Supplied with all necessary conversion parts, with ABE in preparation. Features: - Seat height reduction incl. aids (if required) for changing the side support*- Tested stability, even with luggage- Developed separately for each vehicle and type-tested- Made from tried-and-tested, high-quality materials- Lowering measured at the seat surface - genuine seat height reduction- Quick & easy installation thanks to detailed and illustrated installation instructions- With ABE in preparation- More driving safety- Available immediately for over 350 models The lowering kits from alpha Technik have been proving their worth for many years and offer bikers more riding fun and a safer feeling on the bike. The lowering kits are ideal for beginners, riding schools and for riders who feel more comfortable on a lower motorcycle. The riding dynamics change only insignificantly. As with all lowering systems developed by alpha Technik, not only is the rear lowered, but the vehicle as a whole is considered and (depending on the model) the height of the front is adjusted if necessary. Taking into account the applicable approval guidelines, the most suitable variant for the vehicle type is used, such as a bell crank, spring plate or suspension strut mount. All lowering kits are supplied with the necessary conversion parts and detailed step-by-step installation instructions. Note: - Side stand must be shortened, approval in accordance with StVZO §19/3 (registration in the vehicle documents subject to a charge) is required Modified vehicle parts: - Replace spring plate- Changed position of the fork legs
Navi mount kit T-Lock with smartphone Drybag for Aprilia RSV 4 Tuono 1100 (21-) - SW Motech-Copy
This all-round carefree package includes a waterproof Smartphone Drybag and various fastening elements. The T-Lock mount on the back of the Smartphone Drybag allows quick attachment to the Universal Navi Kit: With a quarter turn clockwise, the Smartphone Drybag is fixed to the clamping arm. The waterproof Smartphone Drybag with large viewing window and an internal dimension of 160 x 80 mm is suitable for almost all common smartphones up to a size of 6.5 inches. This universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Suitable for smartphones up to 6.5 inches Internal dimensions: 160 x 80 mm Waterproof roll closure Water repellent coating T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Aprilia RSV 4 Tuono 1100 (21-), KZ Details Total weight: approx. 0.5 kg Scope of delivery 1 x Smartphone Drybag 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x 2" clamp arm 1 x ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material
PRO Micro tank bag Aprilia RS 125 (21-)
Discreet and straightforward: The PRO Micro fits on almost any tank and safely transports small necessities such as vehicle documents and valuables. Like all PRO tank bags, the Micro sits on an EVA plastic base that guarantees high dimensional stability. The volume of the tank bag can be expanded with the help of a zipper. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects the luggage from shocks, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 3 to 5 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Micro tank bag 1 x PRO top ring 1 x PRO Micro rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 27,0 x 20,5 x 11,0 cm Total weight: 0 ,8 kg Total volume: 3 ,0-5,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
PRO Micro tank bag Aprilia RS 125 (21-)
Discreet and straightforward: The PRO Micro fits on almost any tank and safely transports small necessities such as vehicle documents and valuables. Like all PRO tank bags, the Micro sits on an EVA plastic base that guarantees high dimensional stability. The volume of the tank bag can be expanded with the help of a zipper. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects the luggage from shocks, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 3 to 5 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Micro tank bag 1 x PRO top ring 1 x PRO Micro rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 27,0 x 20,5 x 11,0 cm Total weight: 0 ,8 kg Total volume: 3 ,0-5,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.