Rim Comb 3 front/rear 12" for Vespa GTS/GTS Super/GTV/GT/946 125-300ccm, silver
Description
Product information
High quality forged aluminum rim from ZELIONI. Absolute high-end product with perfect surface finish, forged rim, surface CNC machined and laser engraved ZELIONI logo. Additionally reduced weight. The original valve can not be reused. We recommend the screwable valves from ZELIONI (part no. ZELV01MB) or G-Pro. (part no. MV597680)
- front or rear
- 3.00 Ø 12"
- Aluminum
- silver
Mounting instructions for Vespa GTS models with ABS: For models equipped with ABS as standard on the rear wheel, a mounting kit (Item No. MV000617) including new wheel bolts and screws for the tone wheel is required. This must be ordered at the same time.
Manufacturer
Zelioni
|
Hersteller: Zelioni (Taipei, Taiwan) EU-Importeur: SIP Scootershop GmbH |
Reviews 0
Login
Zubehör Artikel
for Vespa for Vespa GTS/GTS Super/GTV 125-300cc ('14-) For models that are equipped with ABS on the rear wheel as standard, the change to rims from the accessories has always been difficult, often there were problems with the installation of the rear tone wheel. With the SIP bolt kit, these problems are a thing of the past. In the twinkling of an eye, the rims of the "non-ABS" models such as SIP, ZELIONI or even PIAGGIO rims can be mounted, the ABS tone wheel can be screwed to the special wheel nuts with internal thread. Possibly the ABS sensor can drag on the tone wheel, for this we supply two small M5 washers, these simply come to the screw between ABS sensor and swing arm. Consisting of PIAGGIO screws Mounting instructions: Fix the rim with the five new wheel nuts (bolts with hexagon head, internal thread) and the five M8 washers Screw the ABS tone wheel to the internal threads of the wheel nuts using the five M5 Torx screws and the five M5 corrugated washers Now mount the swing arm again The distance of the ABS sensor to the tone wheel should be at least 0,4mm according to PIAGGIO. If the distance is smaller or if the tone wheel rubs against the sensor, one or two of the supplied M5 washers must be placed on the sensor mounting screw between the ABS sensor and the swing arm to create sufficient distance to the tone wheel. CAUTION: The distance should not be too large, otherwise no signal can be picked up.
The CNC machined from aluminum and color anodized valves in straight version or with 80 ° angle are perfect for tubeless rims. Through the screw connection, the extremely lightweight valves can be quickly mounted on the rim, the enclosed rubbers ensure permanent air tightness. With the angled valve is usually easier to fill the tires on the vehicle. Incl. anodized aluminum valve cap. Aluminum CNC black anodized Pair screwable Mounting instructions: Before mounting, clean the valve seat on the rim and before mounting the tire make sure that the valve is clean.
The CNC machined from aluminum and color anodized valves in straight version or with 80 ° angle are perfect for tubeless rims. Through the screw connection, the extremely lightweight valves can be quickly mounted on the rim, the enclosed rubbers ensure permanent air tightness. With the angled valve is usually easier to fill the tires on the vehicle. Incl. anodized aluminum valve cap. Aluminum CNC silver anodized Pair screwable Mounting instructions: Before mounting, clean the valve seat on the rim and before mounting the tire make sure that the valve is clean.
The CNC machined from aluminum and color anodized valves in straight version or with 80 ° angle are perfect for tubeless rims. Through the screw connection, the extremely lightweight valves can be quickly mounted on the rim, the enclosed rubbers ensure permanent air tightness. With the angled valve is usually easier to fill the tires on the vehicle. Incl. anodized aluminum valve cap. Aluminum CNC black matt Pair screwable Mounting instructions: Before mounting, clean the valve seat on the rim and before mounting the tire to ensure a clean seat of the valve.