Rim front/rear for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm, chrome
Description
Product information
The SIP Performance rim for Modern Vespa models come in the usual high quality, where both workmanship and fit are right. Product with perfect surface finish, 20 spokes, surface CNC machined and cast SIP logo. They are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organization) guidelines, the industry standard for rim and tire production, and have the KBA type mark. Thus legally usable in the German road traffic.
- 3.00 -12"
- Aluminum
- chrome
- 20 spokes
- with ABE
- KBA 50336
The latest version of the ABE can be found in the downloads. Please check before buying whether the ABE is valid for the desired vehicle.
Assembly note Vespa GTS models with ABS: For models that are equipped with ABS as standard on the rear wheel, a mounting kit (Part No. MV000617) including new wheel bolts and screws for the tone wheel is required. Order this at the same time.
Manufacturer
SIP Style
|
SIP Scootershop GmbH |
Reviews 0
Login
Zubehör Artikel
With a speed index and approval for up to 180 Km/h, the SIP PERFORMANCE tire allows significantly more than a Vespa GTS can drive. Nevertheless, it feels good to know that you no longer have to worry, at least when it comes to the tire. The sporty profile in combination with the rubber compound make this tire the ideal companion, not only on dry roads, but also on wet roads the tire makes a good figure. Except for trips in mud and snow nothing brings this tire out of balance. Perfectly suited for all drivers who are mainly in the spring, summer and autumn on the road and are looking for a reliable tire for little money. Speed index "S", up to 180 km/h Economy pack, consisting of 2 SIP Performance tires Tread: sporty good properties on dry and wet roads B 120 mm Ø 12" with ECE standard
for Vespa for Vespa GTS/GTS Super/GTV 125-300cc ('14-) For models that are equipped with ABS on the rear wheel as standard, the change to rims from the accessories has always been difficult, often there were problems with the installation of the rear tone wheel. With the SIP bolt kit, these problems are a thing of the past. In the twinkling of an eye, the rims of the "non-ABS" models such as SIP, ZELIONI or even PIAGGIO rims can be mounted, the ABS tone wheel can be screwed to the special wheel nuts with internal thread. Possibly the ABS sensor can drag on the tone wheel, for this we supply two small M5 washers, these simply come to the screw between ABS sensor and swing arm. Consisting of PIAGGIO screws Mounting instructions: Fix the rim with the five new wheel nuts (bolts with hexagon head, internal thread) and the five M8 washers Screw the ABS tone wheel to the internal threads of the wheel nuts using the five M5 Torx screws and the five M5 corrugated washers Now mount the swing arm again The distance of the ABS sensor to the tone wheel should be at least 0,4mm according to PIAGGIO. If the distance is smaller or if the tone wheel rubs against the sensor, one or two of the supplied M5 washers must be placed on the sensor mounting screw between the ABS sensor and the swing arm to create sufficient distance to the tone wheel. CAUTION: The distance should not be too large, otherwise no signal can be picked up.